Model NO.
TRE229
After-sales Service
on Line
Warranty
1years
Structure
Vertical
Power Source
Electric
Type
Simple Disassembly
Automatic
Semi-Automatic
Standard
Standard
Certification
GS, CE, RoHS, ISO, UL
Condition
New
Trademark
HPDMC
Transport Package
Standard
Specification
960*760*1030mm
Origin
China
Product Information
This Ranger Products Electric Tire Changer Machine is one of the most durable and ergonomically engineered tire changers ever. Clamping capacity handles larger tires and wheels.
Product Parameters
Motor power | 0.75 kw/0.55 kw/1.1 kw | Power supply | 220 V/400 V/110 V |
Max.wheel diameter | 41 "(1140 mm) | Max.wheel width | 14"(355 mm) |
Ouside clamping | 10"~21" | Inside clamping | 12"-24" |
Air supply | 8 bar | Bead breaker force | 2500 kgs |
N.W./G.W. | 357/409 kgs | Package size | 960x760x1030 mm |
QTY/20'CY | 22 PCS | Noise level | <75 db |
Features
Full automatic penumatic tilting column. Independent right helper arm, with pneumatic tire lifting device 360 rotary tire pressing helper arm. Four angle directional adjustable tire pressing shovel
Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
Cleaning
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.
Do not use motor oil or grease to lubricate the equipment
Rust Prevention:
-Check daily for any signs of rust or corrosion.
Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
Storing the Equipment
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition
