Model NO.
0104E
Structure
Hydraulic Jack
Capacity (Load)
1-10T
Power Source
Hydraulic
Max Height
>400mm
Certification
CE
Condition
New
Specification
1180*695*340mm
Trademark
HIGH ELEPHANT
Origin
China
After-sales Service:
24 Hours Online
Warranty:
12 Months
Type:
Hydraulic Jack
3.0T Low Position Transmission Jack/crane/car jack/hydraulic jack/jack/floor jack/engine stand/hydraulic bottle jack/hydraulic tools/bottle jack/transmission jack
| Rated Load | Min.Height | Max.Height | N.W/G.W | Package Size | QTY/20CY |
| 3.0T | 116mm | 860mm | 77.5/84.5kg | 1260*700*250mm | 130pcs |
| A | 1000mm | F | 1150mm | L | 1280mm |
| B | 580mm | G | 120mm | M | 1470mm |
| C | 360a265mm | H | 220mm | N | 650mm |
| D | 400mm | I | 880mm | O | ±0° |
| E | 1260mm | J | 960mm | P | 0° |
|
| Lift the car to a certain height with a lift |
| Push the Low Transmission Jack under the car, raise the Low Transmission Jack to the proper position, remove the items to be serviced (transmission, engine, Prop-shaft, front and rear axles, etc.) and place them in the center of the bracket. Then secure the item with a steel chain, open the pressure relief valve, and place the bracket and item in the low position |
| Push the Low Transmission Jack to the desired position, and use a crane to hoist the object down for maintenance |
| After the object is repaired, lift the object with a crane and place it in the center of the bracket, fasten the object with a steel chain, and push the Low Transmission Jack to the proper position. |
| Close the pressure relief valve, step on the oil pump, lift the object to a suitable position, and install the object. If the object position is not correct, you can move the Low Transmission Jack or the adjustment hand wheel under the bracket to adjust |
| Matters needing attention |
| Overload use is strictly prohibited |
| Items should be fastened with steel chains before moving |
| If the object needs to be moved on this Low Transmission Jack, the bracket should be placed at the lowest position |
The ground should be firm and flat, and no unevenness and obstacles are allowed to avoid damage to the wheels and the overturning of the whole machine |
Trade Terms | FOB / CFR |
MOQ | 3UNITS (USD200.00 extrally charged for LCL shipment to cover the inland freight + custom declaration fee) |
Port | QINGDAO |
Shipment | BY SEA /AIR |
Payment Terms | T/T |
Payment condition | 30% prepayment,balanced before shipment. |
Supply Capability | 1000units/month |
Sample Availability | Yes ,But all freight(Inland freight +seafreight) covered by buyer |
Sample Time | 5-10days(depends on whether have in stock) |
Lead Time | 25-30days(Rush season 5-10days longer) |
Packing | Metal frame&Carton |
Delivery time | 30-45days shipping time (depends on destination position) |
Service | 1% free parts;1year warranty after port of destination |
Send Message
