Model NO.
IT-509
Fan
Direct Drive Fan, 11kw Motor
Air Volume
35,000m3/H
Empty Loaded Air Speed
+/- 0.35m/S
Controls
CE Standard Control Box
Transport Package
Polyfoam and Metal Frame
Specification
7110 X 5760 X 3810mm
Trademark
INFITECH
Origin
Guangzhou, China
HS Code
8419899090
Production Capacity
900 Sets/Year
Warranty:
2 Years
Plenum Height:
600mm
Walls:
50mm Rock Wool Panel
Lighting:
LED Lamp
Brightness:
> 1,000lux
Filter:
High Efficiency Filters
INFITECH CE standard multiple work stations mixing room &prep bay & spray paint baking curing oven
Design
Technical parameters
Features
Design
Technical parameters
| Item 1: Preparation bay | |
| Design standard | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
| Airflow | Full downdraft |
| Internal dimensions | 6500×4000×2800mm (L×W×H) |
| External dimensions | 8460×4000×3810mm (L×W×H) |
| Basement | 350mm high, full grids, 900kg/wheel |
| Ceiling lighting | 8 sets, each 4 X 18W, 576W total |
| Brightness | > 800Lux |
| Exhaust system | 1×5.5KW, 970RPM, 380V, 50HZ, SIEMENS motor |
| Air volume | 18,000m3/h, 650pa |
| Filters | Floor filter: Fiberglass filter Exhaust filter: Fiberglass filter |
| Controls | Fan start, emergency stop switch, lighting, failure indication |
| Electrical & Tool cabinets | Yes. |
| Special item | Rated power: 6.5KW |
| Item 2: Paint baking booth with direct-fired heating system | |
| Design standard | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
| Airflow | Full downdraft for spray and cure |
| Internal dimensions | 7000 X 4000 X 2800mm (L X W X H) |
| External dimensions | 7110 X 5760 X 3810mm (L X W X H) |
| Plenum height | 600mm |
| Basement | 350mm high, full grids, 900kg/wheel |
| Entrance door | 1 set, 3200 X 2700mm (W X H), manual door |
| Divider door | 1 set, 6000 X 2400mm(B X H), electric plate roll-up door |
| Personnel door | 1 set, 800 X 2000mm (W X H) |
| Ceiling lighting | 10 sets, each 4 X 18W, 720W total |
| Sidewall lighting | 4 sets, each 4 X 18W, 288W total |
| Brightness | > 1,000Lux |
| Filters | Pre-filter, ceiling filter, floor filter, exhaust filter |
| Intake system | 11KW, 970rpm, 380V, 50Hz, SIEMENS motor |
| Exhaust system | 11KW, 970rpm, 380V, 50Hz, SIEMENS motor |
| Air volume | 35,000m3/h |
| Equipment empty loaded air speed | +/- 0.35m/s |
| Noise | <78db |
| Heats | Direct fired heating system |
| Maximum working temperature | 80°C |
| Controls | CE standard control box |
| Special item | Rated power: 24KW |
| Item 3: Mixing room | |
| Design standard | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
| Internal dimensions | 3000 X 3000 X 2800mm (L X W X H) |
| External dimensions | 3100 X 3100 X 2850mm (L X W X H) |
| Entrance door | 1 set, 800 X 2000mm (W X H) |
| Ceiling lighting | 2 sets, each 4 X 18W, 144W total |
| Filters | Pre-filter, exhaust filter |
| Ventilation system | 1.5KW, 1450RPM, 380V, 50Hz, SIEMENS motor |
| Air volume | 3,500m3/h |
| Controls | CE standard control box |
| Special item | Rated power: 2KW |
Features
| Airflow • Full downdraft airflow for spray and cure • Controlled airflow ceiling | Construction • White pre-coated galvanized steel • Dual-skin insulated panels filled with rock wool, 50mm thick • 600mm high plenum |
| Doors • Manual door, 3 wing entry door (2 + 1 structure) • Personnel door with observation window | Air handling unit • Intake and exhaust motors, 11kw, SIEMENS motor • Direct fired heating system |
| Filtration • Pre-filter: G3 grade pre-filter bag filter • Ceiling filter: F5 grade filter cotton, Model SP-600G • Floor filter: G2 grade fiberglass paint arrestor filters • Exhaust filter: Simple activated carbon filter mat, M type | Controls • Standard Y/Δ step-down start control system •PLC control, higher reliability, lower failure rate •Painting, heating painting, flash-off, baking, lighting, emergency stop switch, failure indication, cooling, motor overload and over-current protection, fan and heating system interlock control, over-temperature alarm indication |
Electric plate roll-up door (Divider door between prep bay and spray booth)
| Trolley (Greatly facilitates the movement of vehicle from one work area to the next)
|
Picking and loading
Engineering case
Company information
Guangzhou Infitech is professional manufacturer of customized European standard spray booths in China. We stick to European standard for spray booth since the business started. What we supply ranges from initial design and layout, technical consultation, manufacturing through to installation and maintenance. We pride ourselves in delivering customized products that suit your customers' individual needs.
Send Message
