Model NO.
IT-20B
Intake/Exhaust System
4X11kw, 970rpm, 400V, 50Hz, CE
Burner Model
Riello RS5, Gas Burner
Noise
<78dB
Illumination
> 800lux
Transport Package
Polyfoam and Metal Frame
Specification
20000 X 7000 X 5000mm
Trademark
INFITECH
Origin
China
HS Code
8419899090
Production Capacity
500 Sets / Year
Warranty:
2 Years
Certification:
CE
Product Name:
Infitech Customized Big Industrial Painting Cabin
Keyword:
Painting Cabin
Voltage:
400V, 50Hz, Your Special Voltage Is Acceptable
Equipment Empty Loaded Air Speed:
+/- 0.27m/S
INFITECH Customized Big Industrial Painting Cabin
Product design
Product descripition
Technical parameters
Entrance door
- With anti-sagging device
- 6400 x 4800 mm (W X H)
- Manual door, 3+3 structure
Cabin structure
Basment
Without pits, with exhaust air collection cabinets on both sides
Intake&Exhaust system
- Non-spark fan design perfectly conforms to EN13355-2004 requirements for fans.
- Motor and fan are completely separated, meeting the compulsory requirements for fans in EN13355- 2004.
- With cylinder-drive paint-bake conversion damper, more quickly and accurately.
- Direct-drive fans, virtually maintenance-free
Heating system
- Heating exchange rate reaches 85%, heating time is 15-25min after burning.
- Adopt EU standards, three-circulation duct designed with high safety and maintainability, energy-saving.
Contral system
- Control board conforms to EN602041-2006;
- Control order conforms to EN133552004;
- Control box conforms to IP55 protection grade.
Engineering case
Company introduction
Guangzhou Infitech is professional manufacturer of customized European standard spray booths in China. We stick to European standard for spray booth since the business started. What we supply ranges from initial design and layout, technical consultation, manufacturing through to installation and maintenance. We pride ourselves in delivering customized products that suit your customers' individual needs.
Product descripition
Technical parameters
| Design standard | BS EN 13355: 2004+A1:2009 BS EN 60204: 2006+A1:2009 |
| The internal dimensions | 20000 X 7000 X 5000(L X W X H) |
| The external dimensions | 20120 X 11630 X 6000(L X W X H) |
| Base design form | Without pits, with exhaust air collection cabinets on both sides |
| Filter area | 28.8m2 |
| Plenum height | 1000mm |
| Wall panel | 60mm wall panel, wallboard filler material: heat-resistant rock wool panel |
| Top panel | 50mm wall panel, wallboard filler material: heat-resistant rock wool panel |
| Entrance door | With anti-sagging device |
| Door type | Manual door, 3+3 structure |
| Door size | 6400 x 4800 mm (W X H) |
| Door arrangement and quantity | 1 set |
| Door descriptions | Containing frame |
| Presonnel door | |
| Door type | Frame structure |
| Door size | 800 x 2000 mm (W X H) |
| Quantity | 2 sets |
| Door descriptions | With safety glass viewing window |
| Sidewall lighting | 20 sets of light fixtures, each 2 X 36W, total 1440W |
| Lighting descriptions | Protection class IP55, CE certified electronic ballasts, OSRAM lamp |
| Ceiling door | 26 sets of light fixtures, each 4 X 36W, total 3744W |
| Lighting description | Protection class IP55, CE certified electronic ballasts, OSRAM lamp |
| Illumination | > 800Lux |
| Filtration system | Pre-filter, Ceiling filter, Exhaust filter |
| Intake/Exhaust system | 4 X 11KW, 970rpm, 400V, 50Hz, CE |
| Parameter of fan | 4X35000m3/h, 650pa |
| Total air volume | 140000m3/h |
| Equipment empty loaded air speed | +/- 0.27m/s |
| Noise | <78 db |
| Heating system | |
| Heat exchanger | Stainless steel 1Gr18Ni9Ti (SUS304) |
| Heat power | 232KW |
| temperature increase capability | 20ºC (from -10ºC to 10ºC under painting status) |
| Maximum operating temperature | 80ºC |
| Heating time | 15-30 minutes (from 20ºC to 60ºC under baking status) |
| Gas burner | RIELLO RS5, Gas burner |
| Contral system | |
| Performance standard | Standard Y/Δ drop step-down start control system |
| Function | Painting, warm painting, baking, lighting, emergency stop switch, failure indication, over-temperature alarm indication |
| PLC | yes |
| Inverter control | Optional |
| Pressure detection | With pressure gauge to indicate pressure of the cabin. |
| Distribution facilities | CE standard electric cable, electric connector, wire tube and step line |
Entrance door
- With anti-sagging device
- 6400 x 4800 mm (W X H)
- Manual door, 3+3 structure
Cabin structure
- "Π" beam made from 80 x 80 square tubes.
- "Π" beams: linked and reinforced by 80 x 80 or 80 x 40 square tubes, evenly distributed along the cabin.
- "Π" beams: linked and reinforced by 80 x 80 or 80 x 40 square tubes, evenly distributed along the cabin.
Basment
Without pits, with exhaust air collection cabinets on both sides
Intake&Exhaust system
- Non-spark fan design perfectly conforms to EN13355-2004 requirements for fans.
- Motor and fan are completely separated, meeting the compulsory requirements for fans in EN13355- 2004.
- With cylinder-drive paint-bake conversion damper, more quickly and accurately.
- Direct-drive fans, virtually maintenance-free
Heating system
- Heating exchange rate reaches 85%, heating time is 15-25min after burning.
- Adopt EU standards, three-circulation duct designed with high safety and maintainability, energy-saving.
Contral system
- Control board conforms to EN602041-2006;
- Control order conforms to EN133552004;
- Control box conforms to IP55 protection grade.
Engineering case
Company introduction
Guangzhou Infitech is professional manufacturer of customized European standard spray booths in China. We stick to European standard for spray booth since the business started. What we supply ranges from initial design and layout, technical consultation, manufacturing through to installation and maintenance. We pride ourselves in delivering customized products that suit your customers' individual needs.
Send Message
