| 1) Powder coating Booth:WLD type power-recycling equipment. | |||
| 2) Equipment body size:L2420mm×W1800mm×H2000mm | |||
| 3) Recycling adopts filter element power-recycling system,configured with polyester fiber filter element,filter material from Taiwan. | |||
| 4) Filter element cabinet design is flat basic type, convenient for Powder recycling. | |||
| 5) Back flushing adopts high compressed air,the flushing time controlled by circuit board,back flushing gap fixed at 60 seconds,back flushing time 1 second. | |||
| 6) Electrostatic powder painting adopts compressed air which processed by drying,drying air compressor equipped by 1.0m3\min.(air compressor provided by customer themselves) | |||
| 7) Material bill technical index: | |||
| Seq# | Item | Material bill,specifications and parameter | Remark |
1 | Room body wall panel | Power coating galvanized steel panel | 1.2mm |
2 | Bottom panel | Power coating stainless panel | 2.0mm |
3 | Lighting fixture | Autifog lighting fixture | 2 lamps |
4 | Air tank | Seamless steel pipe | ø 140,outfall setting |
5 | Air pipe, piece | Galvanized pipe,piece | 1 inch |
6 | Fan | Model 4-72-4A | 1 set Power supply 380v |
| Air Flow:7419m3/h | |||
| Full pressure :1320pa | |||
| Power 5.5KW | |||
7 | Filter element specs | φ325×600 | 4 pieces |
Electricity and air system: | |||
1 | Fan startup | AC contactor,thermal overload protector | |
2 | Impulse back flushing | Electromagnetism impulse valve | |
3 | Air pressure adjustment | pressure reducing valve | |
1)Oven | ||
Oven Size: L4600mm×W2400mm×H2200mm | Floor Setting Type | Front and back door both open |
1. Technical Parameter: | ||
a) Max Temperature:2200C; | ||
b) Working Temperature:180-2200C; | ||
c) Empty Loading Rising Time:≤45 min. | ||
2. Technical Content: | ||
a) Oven Body:Outside panel adopts δ0.476mm stainless steel,Inside panel adoptsδ0.476mm galvanized stainless steel; | ||
b) Insulating layer adopts volume of 120Kg/m3 rock wool,thickness 100mm; | ||
c) Board and board connected by mosaic structure | ||
d) The ceiling has two explosive-proof holes. | ||
3. Oven Appearance:border white,oven body gray white. | ||
2) Heating System |
1. Technical Parameter: |
a) Heating source:0# diesel; |
b) Power supply:380V; |
c) Heating style: Hot air recycling |
2. Technical Content: |
Recycling fan:rated loading type water-cool Centrifugal fan Model:4-72-3.6#C-3KW 1set Air Capacity:5268m3/H Full pressure:989pa |
Burner:G20 Oil Consumption:8-16kg/h Power:320w |
3. In-out air duct:adopt δ0.8mm bended galvanized stainless,outer fiber cloth,heat insulation EPS,thickness 50mm; |
4. In-out wind groove:adopt δ0.8mm bended galvanized stainless,Inside oven uniformly distributed,Adjustable air flow shutter, assure inside oven temperature uniformly; |
5. Heat exchanger:200000 Kcal/hour/set(1set); |
6. Inside panel adopts δ1.0mm galvanized steel sheet,outside panelδ1.2mmgalvanized steel sheet; |
7. Thermal barrier adopts 10mm thickness aluminum silicate,Temperature resistance 8000C;Thermal barrier adopts 150mm of volume of 120Kg/M3 rock wool; |
8. Internal bladder made of stainless steel |
3) Control Setting : |
1. Automatical temperature control system,up and down limit temperature setting, digital display. |
2. This product design accords to international standard,definitely safe when using. |
3. Time meter controls constant temperature time,can turn off at a fixed time. |
4. One control box,centralized control and easy operation. |
mini powder coading booth for small workpiece coating
single station powder coating booth for one person operation
Automotive painting machine with water curtainAny other required sizes please contact us with your detail requirement.
Curing Oven as below:
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods by thicker bubble paper, some of them are packed by carton.
Q2. What is your terms of payment?
A: By T/T, 30% as deposit for production, and 70% balance before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: Normally our quotation is under FOB Guangzhou, but we also accept EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving full payment. If your voltage is different from 380V/3PH/50Hz, the delivery time will be around 20 days for custom-made motors or electric components.
Q5. Can you produce according to the technical drawings?
A: Yes, we can produce by your technical drawings or requirements. We can make drawings for you.
Q6: How do you make our business long-term and good relationship?
A1. We keep good quality and competitive price to ensure our customers benefit ;
A2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
Q7: Why choose WeiLongDa?
