Model NO.
RP-T1002
Delivery Lead Time
30days After Deposit Receipt
Transport Package
10PCS/Box, 12box/CTN
Specification
100X200mm, 4 ply
Trademark
HOPSON TYRE REPAIR
Origin
Ningbo, China
Production Capacity
1000000 Cartons Per Month
Type:
Radial Tyre Repair Patch
Main Material:
Rubber
Size:
100X200mm, 4 Ply; Various Sizes Available
General Info.
Product name: Radial Tyre Repair Patch/ Center-over-injury radial Repair Unit
Size:100x200mm, 4ply
Packaging: 10pcs/box, 12box/ctn
Description:
HOPSON radial repair patches are thick, rubber-reinforced patches which allow placement on the tyre in any direction. A special compounding and design allow the repair unit to felx and resist heat, assuring a permanent repair. With HOPSON Radial Repair Patches, there is no need to apply the repair unit from non-flex to non-flex area. And sicne the system contains a minimum number of repairs, inventory and buffing time are reduced and repair unit selection is simplified. HOPSON repair units last the life of the tire, saving thousands of dollars per year in new tire purchases.
INSTRUCTIONS:
1. Inspect tyre for repairability using tyre manufacturer of HOPSON LAB guideline. If repairable, mark injury with crayon and carefully remove injuring object.
2. Probe injury to determine exact size and direction, removing all deris.
3. Select the appropriate repair patch for injury and type of tire. Apply prebuff cleaner to repair area and use rubber scraper to remove dirt and mold lubricants. Using carbide cutter, drill injury channel 3 times from inside then 3 times fron outside, making sure all damaged and rusted cables have been removed and only good rubber remains.
4. Cement the injury channel with Chemical Vulcanizing Cement and install the appropriate vulcanizing insert. Trim flush with the tire innerliner. Mechanically buff outlined repair area to a velvet-like texture. Remove buffing dust with a clean brush or vacuum. Apply Chemical Vulcanizing Cement to buffed area, working into rubber and ALLOW TO DRY THOROUGHLY.
5. Remove backing and center repair patch over injury and thoroughly stitch down from center out to remove trapped air.
6. Finish repair by applying Inner Liner Sealer around edge of repair patch and to overbuff area.
In your inquiry email, pls kindly let us know the information below if possible.
Part No.
Quantity
Which help us reply to you efficiently. Thank you.
Product name: Radial Tyre Repair Patch/ Center-over-injury radial Repair Unit
Size:100x200mm, 4ply
Packaging: 10pcs/box, 12box/ctn
Description:
HOPSON radial repair patches are thick, rubber-reinforced patches which allow placement on the tyre in any direction. A special compounding and design allow the repair unit to felx and resist heat, assuring a permanent repair. With HOPSON Radial Repair Patches, there is no need to apply the repair unit from non-flex to non-flex area. And sicne the system contains a minimum number of repairs, inventory and buffing time are reduced and repair unit selection is simplified. HOPSON repair units last the life of the tire, saving thousands of dollars per year in new tire purchases.
INSTRUCTIONS:
1. Inspect tyre for repairability using tyre manufacturer of HOPSON LAB guideline. If repairable, mark injury with crayon and carefully remove injuring object.
2. Probe injury to determine exact size and direction, removing all deris.
3. Select the appropriate repair patch for injury and type of tire. Apply prebuff cleaner to repair area and use rubber scraper to remove dirt and mold lubricants. Using carbide cutter, drill injury channel 3 times from inside then 3 times fron outside, making sure all damaged and rusted cables have been removed and only good rubber remains.
4. Cement the injury channel with Chemical Vulcanizing Cement and install the appropriate vulcanizing insert. Trim flush with the tire innerliner. Mechanically buff outlined repair area to a velvet-like texture. Remove buffing dust with a clean brush or vacuum. Apply Chemical Vulcanizing Cement to buffed area, working into rubber and ALLOW TO DRY THOROUGHLY.
5. Remove backing and center repair patch over injury and thoroughly stitch down from center out to remove trapped air.
6. Finish repair by applying Inner Liner Sealer around edge of repair patch and to overbuff area.
In your inquiry email, pls kindly let us know the information below if possible.
Part No.
Quantity
Which help us reply to you efficiently. Thank you.
Part No. | Size(mm) | Description | Box Qty | Case Qty |
RP-T451 | 45×75 | 1 Ply | 20 | 24 |
RP-T601 | 60×110 | 1 Ply | 10 | 24 |
RP-T651 | 65×80 | 1 Ply | 10 | 24 |
RP-T701 | 70×120 | 1 Ply | 10 | 24 |
RP-T751 | 75×125 | 1 Ply | 10 | 24 |
RP-T752 | 75×145 | 2 Ply | 10 | 24 |
RP-T753 | 75×165 | 2 Ply | 10 | 24 |
RP-T754 | 75×220 | 2 Ply | 10 | 24 |
RP-T755 | 75×250 | 2 Ply | 10 | 24 |
RP-T1001 | 100×125 | 3 Ply | 10 | 12 |
RP-T1002 | 100×200 | 4 Ply | 10 | 12 |
RP-T1250 | 125×150 | 4 Ply | 10 | 12 |
RP-T1251 | 125×170 | 4 Ply | 10 | 12 |
RP-T1252 | 125×250 | 5 Ply | 10 | 12 |
RP-T1253 | 125×330 | 5 Ply | 10 | 12 |
RP-T1801 | 180×230 | 5 Ply | 10 | 8 |
RP-T1802 | 180×440 | 5 Ply | 5 | 4 |
RP-T2005 | 200 ×350 | 5 Ply | 5 | 4 |
Send Message