Model NO.
AT-D45
OEM
Accept
Inlet Pressure
0.8MPa
Outlet Connection
1/4′′ Bsp
Bucket Capacity
45L
Material
Aluminium Alloy
Transport Package
Foam & CTN
Specification
44.5*44.5*90cm
Trademark
Alphabest
Origin
China
HS Code
8413190000
Production Capacity
150000PCS/Year
After-sales Service:
14 Months
Warranty:
14 Months
Type:
Grease Guns
Standard:
Standard
Certification:
ISO, CE
Pressure Ratio:
60:1
Product Description:
High pressure Pneumatic Grease pump is powered by compressed air to move low- to medium-viscosity grease from one place to another, such as from a storage container to a reservoir or from a container directly to machinery.
Pneumatic Grease Pump Dispenser dispense grease more efficiently and take less effort to operate compared to the manual grease dispensers.
Portable Pneumatic Grease Pump Dispenser mainly used in industrial applications where grease is used frequently, such as lubricating large machinery, construction equipment, or trucks etc.
Product Parameters:
Product Details:
Product Specification:
Application:
Instructions:
Trouble shooting and Analyses:
Factory photoes:
FAQ:
1.Q:Can you provide the samples to us?
A: yes, we can provide the sample to you in free, but the cost of the freight on your account.
2. Q:Can you do the order according to the customer requirement?
A:Yes, we can do the order according to your sample or drawings, OEM/ODM service provided.
3. Q:What is your delivery time?
A:Normally, it's 7 days if the goods are in stock. It will takes about 15-25days if the goods are not in stock, Mainly depends on the order quantity.
4.Q:What is your terms of payment?
A:Generally 30% value of goods as deposit, balance amount against the copy of the BL.
5. Q: How long is the warranty ?
A: 14 months since the container shipped except quick-wear parts.
High pressure Pneumatic Grease pump is powered by compressed air to move low- to medium-viscosity grease from one place to another, such as from a storage container to a reservoir or from a container directly to machinery.
Pneumatic Grease Pump Dispenser dispense grease more efficiently and take less effort to operate compared to the manual grease dispensers.
Portable Pneumatic Grease Pump Dispenser mainly used in industrial applications where grease is used frequently, such as lubricating large machinery, construction equipment, or trucks etc.
Product Parameters:
Product Details:
Product Specification:
| Model: | AT-D45 |
| Pressure Ratio: | 60:1 |
| Inlet air Pressure: | 0.6-0.8 Mpa |
| Output Pressure: | 60Mpa |
| Flow Rate: | 0.85L/Min |
| Bucket Capacity: | 45L |
| Weight: | 20KGS |
| Dimension: | 44.5*44.5*90CM |
| Accessories: | Grease Gun,4M Grease Hose |
Application:
Instructions:
Trouble shooting and Analyses:
| Problem | Trouble shoot | Resolutions |
| Air leak | The contact surface of the sliding block and valve seat are wear out | Disassemble and grind them separately to meet the sealing requirements |
| The sliding block is shifted, and the screw of the limit plate is loose | Disassemble and make the adjustment,tighten the screws | |
| Can't suck up the oil | Lifting plate is loose | Install the lifting plate and tighten the screws |
| something else at the oil inlet | check and clear it | |
| Oil is too thick | Choose grease according to season, generally use 0#-1# in winter, 1#-2# in spring and autumn, and 2#-3# in summer | |
| something else stuck in the valve | check and clear it | |
| Insufficient grease | increase the grease | |
| The O-ring of the pump is wear out | change a new one | |
| Oil leaking from grease gun | Oil seal is wear out or damaged | change a new one |
| Insufficient pressure of oil output | The output pipeline is blocked and the oil delivery is not smooth | Disassemble the grease gun and clean the blocked parts |
| The oil passage in the grease gun is partially blocked | Disassemble and make the adjustment,tighten the screws | |
| something else in the check valve in the plunger rod | Disassemble the plunger rod and clean it | |
| something else between the check valve and the oil inlet valve | Disassemble and clean it | |
| grease is discharged When exhausting | Oil leakage of U-shaped sealing ring | change a new one |
Factory photoes:
FAQ:1.Q:Can you provide the samples to us?
A: yes, we can provide the sample to you in free, but the cost of the freight on your account.
2. Q:Can you do the order according to the customer requirement?
A:Yes, we can do the order according to your sample or drawings, OEM/ODM service provided.
3. Q:What is your delivery time?
A:Normally, it's 7 days if the goods are in stock. It will takes about 15-25days if the goods are not in stock, Mainly depends on the order quantity.
4.Q:What is your terms of payment?
A:Generally 30% value of goods as deposit, balance amount against the copy of the BL.
5. Q: How long is the warranty ?
A: 14 months since the container shipped except quick-wear parts.
Send Message
