Model NO.
MT-TP35A
Type
Double Cylinder Hydraulic Lift
Lifting Capacity
3.5T
Driving Type
Hydraulic
Driving Motor Number of Mechanical Lift
1
Double Cylinder Lift Type
Planer-type
Condition
New
Design
Two Post
Lifting Height
1800mm
Machine Weight
About 550 Kg
Electric Supply
220V /380V/110V
Min Height
125mm
Lifting Time
40s-50s
Air Pressure
6-8bar
Motor Power
2.2kw
Overall Height
2830mm
Overall Width
3340mm
Width Between
2850mm
Transport Package
Standard Exporting Package
Specification
2850mm*450mm*670mm
Origin
China
HS Code
84254290
| 1.The base plate type design,which is suitable for the auto repair shop or workshop with low ground floor,can enhance the support force of the lift and the ground,and improve the overall security coefficent by 20%; 2.Equipped with two-cylinder,plate chain and steel wire rope balance system,the lift goes up and down smoothly; 3.The hydraulic power unit is equipped with the throtting device,you can therefore adjust the descent speed at any time; 4.Mechanical safety device of intermational standards; 5.Double insurance from self-locking protection device makes the operation safe and easy; 6.Connected simuitaneously by two ropes,thereby forcing two slides to move simultaneously and effectively preventing the vehicle from tilting; 7.Various arm design for you to choose; 8.Rubber support pads are equipped with both the single-screw height adjustment and the staged height adjustment,which is for your random selection; 9.Large load carrying chains,safe and reliable; 10.Pass the 115% dynamic and 150% static tests; |
| Lifting capacity | 3500kg |
| Lifting time | 40-50s/50s |
| Lifting height | 1800mm |
| Air pressure | 6-8bar |
| Minimum height | 125mm |
| Motor power | 2.2kw |
| Overall width/height | 3340mm/2830mm |
| Power Supply | 110V/230V/400V |
| Weight | 550kg |
| Packing size | 2850mm*450mm*670mm |
| Width between columns | 2850mm |
