Special full steel rope with IWRC
Based on the PAWO F7 the PAWO F7S was developed. The fiber component of the F7 steel core was replaced by a steel strand, thus achieving an even higher metallic cross-section plus an even higher breaking strength.
This full steel rope is primarily used in installations where the rope service life is more affected by the impact of permanent bends than by wear from the traction sheave. The steel wire rope core minimizes rope elongation in comparison to the types F3 and F7. As a consequence, the rope is particularly suitable for high-rise applications with many bending cycles.
Properties
- medium and high-rise
- intermediate to high number of bending cycles
- normal to heavy usage levels
- low stretch
- long service life
Technical data
Construction: 8 x 19 Warrington with steel wire rope core, regular lay,
technical terms of delivery to DIN EN 12385, ISO 4344
load-bearing wires in the outer strands: 152
tensile grade 1570 N/mm2, steel wire bright or galvanized
| rope Ø (permissible tolerance) | |
|---|
| no load: | with load (10% of Fmin): |
| max. 3% < 10 mm | min. -1% <= 10 mm |
| max. 2% > 10 mm | min. -1% > 10 mm |
| rope diameter (mm) | calculated mass (kg/m) | min. breaking load (kN) | part-no. |
|---|
| 8 | 0,28 | 44,6 | 711208030 |
| 9 | 0,356 | 56 | 711209030 |
| 10 | 0,436 | 69,5 | 711210030 |
| 11 | 0,523 | 83,1 | 711211030 |
| 12 | 0,619 | 98,9 | 711212030 |
| 13 | 0,727 | 116 | 711213030 |
| 14 | 0,857 | 134,8 | 711214030 |
| 15* | 0,959 | 152,8 | 711215030 |
| 16** | 1,1 | 176,1 | 711216030 |
| 18* | 1,375 | 218,6 | 711218030 |
| 19*** * | 1,544 | 245,2 | 711219030 |
| 20* | 1,704 | 270,8 | 711220030 |
* No stock material
** Can also be used as 5/8"
*** Can also be used as 3/4"
