Model NO.
IC
Driving Motor Number of Mechanical Lift
1
Double Cylinder Lift Type
Thin Plate Type
Shearing Lift Type
Small Shear Type
Condition
New
Brand
Boalee
Design
Two Post
Lead Time
30days
Supply
50sets/Mth
Pkg
Wooden Box
Standard
EU
Transport Package
Standard Export Package
Specification
standard
Trademark
BAOLEE
Origin
China
HS Code
84281010
Production Capacity
10000 Units/Year
After-sales Service:
18mths
Warranty:
18mths
Type:
One Cylinder Hydraulic Lift
Lifting Capacity:
3T
Driving Type:
Hydraulic
Certification:
CE, ISO
SCISSOR CAR LIFT
MODEL: IC SJG3.0
LIFTING HEIGHT: MAX 3.6M
LOAD CAPACITY: MAX 3T
PLATFORM SIZE: 5200 X 2800 MM ( LXW)
DIMENSION : 5280 X 2800 X 890MM (LXWXH)
MOTOR POWER: 380V, 5.5KW, 3P
SPEED: 4-6 M/MIN
MAIN MATERIAL SPECIFICATION
SCISSOR STRUCTURE: STEEL RECTANGULAR TUBE SIZE 200MM X 100MM X 6MM
HYDRAULIC CYLINDER: DIAMETER 100MM X 2PCS
PUMP STATION: 5KW
PLATFORM: CHECKERED STEEL PLATE
HANDRAIL: DETACHABLE HANDRAIL ON 5200MM SIDE, HEIGHT 0.9 M
CONTROL AND INSTALLATION
CONTROL: 2 DIGITAL DISPLAY CONTROL PANELS, ONE ON THE GROUND FLOOR, ANOTHER ON THE TOP FLOOR.
REMOTOR CONTROLLER: OPTIONAL
INSTALLATION: PIT INSTALLATION
SAFETY DEVICE:
-- OVERLOAD PROTECTION
-- EMERGENCY STOP
-- MANUAL DOWN DEVICE
-- WARNING LIGHTS
WARRANTY: ONE YEAR EX WORKS
Modern elevators are mainly composed of traction machines (winches), guide rails, counterweight devices, safety devices (such as speed limiters, safety gears and buffers, etc.), signal control systems, cars and hall doors. These parts are respectively installed in the hoistway and machine room of the building. Steel wire rope friction transmission is usually used. The wire rope goes around the traction sheave, and the two ends are respectively connected to the car and the counterweight. The motor drives the traction sheave to lift the car up and down. Elevators are required to be safe and reliable, with high conveying efficiency, accurate leveling and comfortable riding. The basic parameters of the elevator mainly include rated load capacity, number of passengers, rated speed, car outline size and shaft type, etc.
MODEL: IC SJG3.0
LIFTING HEIGHT: MAX 3.6M
LOAD CAPACITY: MAX 3T
PLATFORM SIZE: 5200 X 2800 MM ( LXW)
DIMENSION : 5280 X 2800 X 890MM (LXWXH)
MOTOR POWER: 380V, 5.5KW, 3P
SPEED: 4-6 M/MIN
MAIN MATERIAL SPECIFICATION
SCISSOR STRUCTURE: STEEL RECTANGULAR TUBE SIZE 200MM X 100MM X 6MM
HYDRAULIC CYLINDER: DIAMETER 100MM X 2PCS
PUMP STATION: 5KW
PLATFORM: CHECKERED STEEL PLATE
HANDRAIL: DETACHABLE HANDRAIL ON 5200MM SIDE, HEIGHT 0.9 M
CONTROL AND INSTALLATION
CONTROL: 2 DIGITAL DISPLAY CONTROL PANELS, ONE ON THE GROUND FLOOR, ANOTHER ON THE TOP FLOOR.
REMOTOR CONTROLLER: OPTIONAL
INSTALLATION: PIT INSTALLATION
SAFETY DEVICE:
-- OVERLOAD PROTECTION
-- EMERGENCY STOP
-- MANUAL DOWN DEVICE
-- WARNING LIGHTS
WARRANTY: ONE YEAR EX WORKS
Modern elevators are mainly composed of traction machines (winches), guide rails, counterweight devices, safety devices (such as speed limiters, safety gears and buffers, etc.), signal control systems, cars and hall doors. These parts are respectively installed in the hoistway and machine room of the building. Steel wire rope friction transmission is usually used. The wire rope goes around the traction sheave, and the two ends are respectively connected to the car and the counterweight. The motor drives the traction sheave to lift the car up and down. Elevators are required to be safe and reliable, with high conveying efficiency, accurate leveling and comfortable riding. The basic parameters of the elevator mainly include rated load capacity, number of passengers, rated speed, car outline size and shaft type, etc.
Send Message
