Support vehicles:
For Ci-troen :
For C-Zero/ C1/ C2/ C3/ C3 PICASSO/ DS3/For C-ELYSEE/ C4/ C4 CACTUS/ C4 For PICASSO/ DS4/ DS 5LS/C5/ DS5 /C6 / C8/ C-CROSSER/ C4 AIRCROSS/For NEMO/For BERLINGO/ForJUMPY/For JUMPER/ AX/ SAXO/BX/ ZX/ For XSARA/ For XANTIA/ XM/ For EVASION/ C15/For FUKANGFUKANG 988/For ELYSEE/ForC-ELYSEE(R3)/For C-TRIOMPHE/For C-QUATRE
For P-eugeot:
iON/ 107/ 108 /206 207/ 207+/ 280/ 301/ HOGGAR/ 307/ 308/ RCZ/ 407/ 408/ 508/ 607/ 807/1007/ 2008/ 3008/ 4007/ 4008/ 5008/ BIPPER/ PARTNER/ EXPERT/ 106/ 205/ 306/ 309/ 405/ 406/ 605/ 806
Language:
English, Chinese, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
Software Version: Lexia3 V48, PP2000 V45, Diagbox Version V7.83
(default version is V7.02,CD has upgrade patch inlcuded, buyer can update diagbox yourself)
System Require: Winows XP or Windows 7 32bits only , and must close anti-virus program.
4.Diagbox V7.02 to V7.82 Password: Scary01
V7.83 Password: Maitresox01
update attention: please cut the file "C:AWRoot\bin\fi\APPDIAG.SYS" out before update, and then click update package! after complete update please paste the cutted file back into the previous folder. which can avoid activating problem.
Description:
Dealer lexia3, PP2000 diagnostic scanner for comprehensive for Citroen and for Peugeot cars diagnostic. You can do all as a authorized dealer does.lexia3,PP2000 diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics lexia3, PP2000 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Lexia 3 Supported Functions:
Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic functions are supported
1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version,
manufacturer, etc...
2.Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too
low pressure").
Program supports report printing or copy to clipboard.
3.Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4.Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5.Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant
Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all
measured values). Logging to file is also supported,which allows offline analysis.
6.Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel,
lock/unlock doors, cut off fuel, etc..)
7.Programming Functions/Adaption
This feature is of great importance in all vehicles because systems like Engine control units,
Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform
reset or programming procedures after car repair is done, or even configuration after replacing
broken
